Author Topic: Step by step guide for the internal battery mod  (Read 4065 times)

Offline Remzi

  • Administrator
  • Full Member
  • *****
  • Posts: 104
    • View Profile
Step by step guide for the internal battery mod
« on: February 13, 2019, 10:55:55 PM »
A friend from Italy asked me to help him making this mod.I will go in to more detail.

STEP 1 Building the battery pack:

Shopping list.

1 X Battery Charger Protection Board Module

6 X 18650 Batteries

1 X DC-DC Step down buck converter

1 X Soldering Iron

1 X Multimeter







Making the PSU connector cable:

You need the cut off the DIN connector from an old C64 PSU.



Plug in the DIN connector and find the continuity to the leg in the image above.

« Last Edit: March 10, 2019, 01:23:49 PM by Remzi »

Offline Remzi

  • Administrator
  • Full Member
  • *****
  • Posts: 104
    • View Profile
Re: Step by step guide for the internal battery mod
« Reply #1 on: February 18, 2019, 06:24:49 PM »
Adjusting th step down buck converter:

Apply 12V DC to input of the module and monitor the output with a multimeter.Turn the screw clockwise to drop the voltage to 5V or 5.1V.









« Last Edit: March 10, 2019, 01:25:44 PM by Remzi »