Load64
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Search
Login
Register
Load64
»
General Category
»
DC/Battery Powered Commodore 64
»
Step by step guide for the internal battery mod
« previous
next »
Print
Pages: [
1
]
Author
Topic: Step by step guide for the internal battery mod (Read 7031 times)
Remzi
Administrator
Full Member
Posts: 105
Step by step guide for the internal battery mod
«
on:
February 13, 2019, 10:55:55 PM »
A friend from Italy asked me to help him making this mod.I will go in to more detail.
STEP 1 Building the battery pack:
Shopping list.
1 X
Battery Charger Protection Board Module
6 X
18650 Batteries
1 X
DC-DC Step down buck converter
1 X
Soldering Iron
1 X
Multimeter
Making the PSU connector cable:
You need the cut off the DIN connector from an old C64 PSU.
Plug in the DIN connector and find the continuity to the leg in the image above.
«
Last Edit: March 10, 2019, 01:23:49 PM by Remzi
»
Logged
Remzi
Administrator
Full Member
Posts: 105
Re: Step by step guide for the internal battery mod
«
Reply #1 on:
February 18, 2019, 06:24:49 PM »
Adjusting th step down buck converter:
Apply 12V DC to input of the module and monitor the output with a multimeter.Turn the screw clockwise to drop the voltage to 5V or 5.1V.
«
Last Edit: March 10, 2019, 01:25:44 PM by Remzi
»
Logged
Print
Pages: [
1
]
« previous
next »
Load64
»
General Category
»
DC/Battery Powered Commodore 64
»
Step by step guide for the internal battery mod